625B61

Ring-style, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.2 to 10.5k Hz, side exit, 10-ft integral armor cable, frequency sweep ISO 17025 accredited calibration

Specifications

English: SI:
Performance
Sensitivity (±5 %) 100 mV/g 10.2 mV/(m/s²) [1]
Measurement Range ±50 g ±490 m/s²
Frequency Range (±5 %) 30 to 390000 cpm 0.5 to 6500 Hz [4]
Frequency Range (±10 %) 22 to 450000 cpm 0.37 to 7500 Hz
Frequency Range (±3 dB) 12 to 630000 cpm 0.2 to 10500 Hz
Resonant Frequency 1500 kcpm 25 kHz [2]
Broadband Resolution (1 to 10000 Hz) 50 µg 491 µm/sec2 [2]
Non-Linearity ±1 % ±1 % [3]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) 5000 g pk 49050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Enclosure Rating IP68 IP68
Electrical
Settling Time (within 1% of bias) ≤8.0 sec ≤8.0 sec
Discharge Time Constant ≥1.0 sec ≥1.0 sec
Excitation Voltage 18 to 28 VDC 18 to 28 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Spectral Noise (10 Hz) 2.5 µg/√Hz 24.5 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 0.8 µg/√Hz 7.8 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 0.5 µg/√Hz 4.9 (µm/sec2)/√Hz [2]
Electrical Protection RFI/ESD RFI/ESD
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size – Diameter 1.38 in 35.1 mm
Size – Height 1.13 in 28.7 mm
Weight (without cable) 4.7 oz 133 gm
Mounting Through Hole Through Hole
Mounting Thread 1/4-28 Male Not Applicable [5]
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector Integral Armored Cable Integral Armored Cable
Electrical Connection Position Side Side
Cable Length 10 ft 3.0 m
Cable Type Polyurethane Polyurethane [6]
All specifications are at room temperature unless otherwise specified.

CE

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] Stainless steel armor jacket over twisted shielded pair.
[7] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
080B45 Thermal Boot (1)
081A73 Captive mounting bolt 1/4-28 x 1.34″ (1)
ICS-1 NIST-traceable single-axis amplitude response calibration from 600 cpm (10 Hz) to upper 5% frequency (1)

Product Enquiry

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

How may we assist?

Name(Required)
This field is for validation purposes and should be left unchanged.