Specifications
English: | SI: | ||
---|---|---|---|
Performance | |||
Sensitivity (±10 %) | 100 mV/g | 10.2 mV/(m/s²) | [1] |
Measurement Range | ±50 g pk | ±491 m/s² pk | |
Frequency Range (±5 %) | 1.5 to 5500 Hz | 1.5 to 5500 Hz | |
Frequency Range (±3 dB) | 0.5 to 13 kHz | 0.5 to 13 kHz | |
Resonant Frequency | ≥26 kHz | ≥26 kHz | |
Broadband Resolution (1 to 10000 Hz) | .3 mg | 3.0 mm/s2Â rms | [2] |
Non-Linearity | 1 % | 1 % | [3] |
Transverse Sensitivity | ≤5 % | ≤5 % | |
Environmental | |||
Overload Limit (Shock) | ±5000 g pk | ±5000 g pk | |
Temperature Range (Operating) | -65 to 250 °F | -54 to 121 °C | |
Temperature Response | See Graph %/°F | See Graph %/°F | [2] |
Enclosure Rating | IP68, IP69K | IP68, IP69K | |
Electrical | |||
Excitation Voltage | 18 to 30 VDC | 18 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤150 Ohm | ≤150 Ohm | |
Output Bias Voltage | 8 to 12 VDC | 8 to 12 VDC | |
Discharge Time Constant | ≥.32 sec | ≥.32 sec | |
Settling Time (within 10% of bias) | |||
Spectral Noise (1 Hz) | 90 µg/√Hz | 883 (µm/sec2)/√Hz | [1][2] |
Spectral Noise (10 Hz) | 20 µg/√Hz | 196 (µm/sec2)/√Hz | [1][2] |
Spectral Noise (100 Hz) | 10 µg/√Hz | 98.1 (µm/sec2)/√Hz | [1][2] |
Spectral Noise (1 kHz) | 3.0 µg/√Hz | 29.4 (µm/sec2)/√Hz | [1][2] |
Electrical Isolation (Case) | ≥100000000 Ohm | ≥100000000 Ohm | |
Physical | |||
Sensing Element | Ceramic | Ceramic | |
Sensing Geometry | Shear | Shear | |
Housing Material | Stainless Steel | Stainless Steel | |
Sealing | Hermetic | Hermetic | |
Size – Height | .72 in | 18.3 mm | |
Size – Length | .95 in | 24.1 mm | |
Size – Width | .95 in | 24.1 mm | |
Weight (Maximum) | 3.0 oz | 85 gm | |
Electrical Connector | 4-Pin, M12 | 4-Pin, M12 | |
Electrical Connection Position | Side | Side | |
Mounting | Through Hole | Through Hole | |
Mounting Torque (Through Bolt) | 2 to 5 ft-lb | 2.7 to 6.8 N-cm |
All specifications are at room temperature unless otherwise specified.